Mobile service: we come to you · Mount Albert, the GTA & beyond Dripless, environmentally safe oil spraying (437) 999-1637 oes@ontarioequipmentservices.ca

Fleets & mixed yards · Mobile across the GTA and beyond

Fleet Rustproofing and Mobile Wash Programs for Trucks, Trailers and Equipment

Fleets rust one skipped unit and one missed wash at a time. We come to your yard, work through the lineup, and return through the season for wash-downs, greasing and the next oil-spray round.

(437) 999-1637
  • Pickups, semis, trailers & equipment
  • One visit can cover a whole yard
  • Regular visits can be scheduled
  • Dripless amber or black oil
Green Kenworth tractor hitched to a float trailer in a yard
The short answer

Ontario Equipment Services offers mobile fleet rustproofing and fleet washing across the GTA and beyond. We come to your yard, power wash salt and mud off pickups, work vans, dump trucks, semis, trailers and heavy equipment, then oil spray with dripless amber oil (black on request) and grease where needed. One visit can cover a whole yard, and regular visits can be scheduled. Call (437) 999-1637.

Rust in a fleet seldom comes down to one bad winter. It builds in small gaps: the trailer parked in the back row all February, the dump truck that missed the fall spray because it was on a job, the pickup nobody washed for three weeks. Each gap is more time with salt on bare steel, and across a yard it shows up as frames, lines and connectors failing long before the rest of the unit.

Fleet rustproofing done as a program closes those gaps by putting every unit on the same rhythm. A typical program is a full oil-spray round in the fall, salt wash-downs through the winter, a spring wash and grease once the roads are clean, and cab or seat work wherever it’s needed. The right mix depends on what you run, so we plan it with you.

Ontario Equipment Services is mobile, with no shop. From our base in Mount Albert we come to contractor yards, trucking lots, farm yards and job sites across the GTA and beyond, and have done for more than five years. Our fleet washing services and oil spraying work the same way: fleets are welcome, regular visits can be scheduled, and one visit can cover a whole yard.

We are a mobile service. No shop: we come to you.

Based in Mount Albert, we work at your yard, job site or home across the Greater Toronto Area and beyond.

(437) 999-1637
The problem

Why fleet trucks and equipment rust ahead of schedule

Ontario’s salt season runs roughly from November to April, and Environment and Climate Change Canada puts Canada’s average use at 5 million tonnes of road salts a year. Ontario’s Ministry of Transportation also sprays anti-icing liquid on highways before storms and pre-wets its salt so it stays on the pavement. Every tire throws that brine and wet salt back up, and it coats frames, crossmembers, wiring and brake lines on the way.

Fleets add their own risks on top of the weather. These are the usual reasons some units in a yard rust well ahead of the others:

  • 01
    Idle time on salt

    Spare trucks, seasonal equipment and trailers waiting for a load can sit for weeks with brine drying on them, and the salt keeps working.

  • 02
    Washing gaps in storm season

    In a run of storms, washing is the first job dropped, so a truck goes out salty, comes back salty and never gets a clean start.

  • 03
    Units that miss the fall round

    Whatever is out on a job, in for repairs or loaned to another site on spray day goes into winter bare unless someone books it later.

  • 04
    Nobody owns the underside

    When drivers rotate between units, nobody watches a particular truck’s frame, so small problems go unnoticed.

  • 05
    Mud and salt together

    Construction units collect site mud and road salt at the same time. Packed mud holds moisture and chlorides against frames and tracks long after the storm.

  • 06
    Dirty seasonal changeovers

    Plow trucks parked for summer and summer machines parked for winter tend to go into storage unwashed, leaving salt on them for months.

Through the year

What a season-long fleet program can look like

Treat this as a starting point, not a menu. Programs are built from the same few pieces, timed around salt season and your busy periods, and you choose which units get which services.

  • Fall oil-spray round

    Each unit washed and oil sprayed before the salt trucks start, ideally over one or two yard visits. Fall is best, but it’s never too late.

  • Winter salt wash-downs

    Wash-downs between storms to strip salt crust off frames, bodies, decks and undercarriages, on whatever rhythm suits your workload and the weather.

  • Catch-up and touch-ups

    Units that missed the fall round get sprayed mid-winter, and spots where the film has worn thin, like plow mounts or trailer undersides, get a touch-up.

  • Spring wash and grease

    Once salt season ends, a full wash-down flushes the winter out of frames and seams, followed by greasing to each manufacturer’s grease points and intervals.

  • Cabs and seats as needed

    Cab cleaning when a truck changes drivers or after a hard winter, and repair or re-covering for torn seats before the damage spreads.

  • Dripless, environmentally safe oil

    Our dripless oil stays on the unit instead of running across your yard, and the products we use are environmentally safe.

On the day

How a fleet yard visit works

Before booking, we’ll ask for a unit list: what each unit is, roughly how big, and what you want done to it. A half-ton pickup and a tri-axle dump truck need very different time and coverage, so the list lets us plan a realistic day.

Next is where everything is parked. If the whole fleet sits in one yard, one visit can cover it. If units are split between a home yard and job sites, we’ll work out a sensible order.

Timing is planned around your shifts, so units get done while they’d be parked anyway. Tell us when trucks are usually in the yard and we’ll agree on timing together; anything still out when we finish can be picked up next visit. What helps on the day:

  • 01
    Unit list

    Unit numbers, type, and what each one needs: wash, oil spray, grease, cab or seat.

  • 02
    Parking map

    Which units are where, especially if they’re spread across more than one yard or site.

  • 03
    Someone who can move units

    A contact who can shift a unit that’s blocked in, or open an enclosed trailer or service body.

  • 04
    Drains and ditches

    Where your catch basins, ditches and any nearby watercourse are, so we can plan where to set up.

  • 05
    Units to skip

    Anything about to be sold, scrapped or sent for major repairs, so time goes where it counts.

Mixed fleets

Pickups, dump trucks, semis and excavators in the same yard

Few yards hold one kind of unit. An excavating or landscaping company might run pickups, dump trucks, float trailers, an excavator and a skid steer. One program covers the lot, with the focus shifting by unit type:

  • Pickups and work vans

    Frames, rocker panels, wheel wells, brake and fuel lines and body seams, on the units that log the most winter driving.

  • Dump trucks and tri-axles

    Frame rails under the box, hoist and tailgate hinges, hydraulic line fittings, and a box that carries wet fill, gravel and winter sand.

  • Semis and trailers

    Fifth wheels, frame rails, crossmembers, landing gear, lighting connectors, and trailer floors and decks that ride in road spray all winter.

  • Plow and salter trucks

    Mounts, spreader areas and plow pivots, with more detail on our snow plow and salter rustproofing page.

  • Excavators and loaders

    Undercarriages, tracks, booms, buckets and pins, washed down and greased, with oil spray where salt and mud collect.

  • Compact equipment

    Skid steers, mini excavators, telehandlers, forklifts and man lifts: the smaller units that are easiest to forget on spray day.

Owner’s checklist

What to track so no unit slips through

A program only works if every unit is in it, and you’re best placed to track that. We suggest a simple fleet sheet, on paper or in your existing maintenance system, that shows which units are protected right now and which aren’t.

The amber oil helps, because a quick look under a unit shows whether it was done this season. Columns worth keeping:

  • 01
    Every unit

    Each truck, trailer and machine by unit number, including spares and seasonal equipment that’s easy to leave off.

  • 02
    Service dates

    When each unit was last washed, oil sprayed and greased, so you can see at a glance what’s due.

  • 03
    Missed rounds

    Which units were out, in for repairs or parked elsewhere on visit day, so they go to the top of the next list.

  • 04
    Things we mentioned

    Anything we point out while we work, like a weeping fitting or a worn hose, so your mechanic sees it.

  • 05
    Fleet changes

    Units added, sold or moved to another yard, so the next round covers the fleet you actually have.

Where we stop

Washing, oil spray and greasing, not mechanical repairs

A fleet program with us covers power washing, oil spraying and rustproofing, greasing, cab cleaning and seat upholstery. We don’t do mechanical repairs, brake work, welding, frame or body repair, or hydraulic and electrical work, and we don’t carry out safety inspections. Those stay with your mechanic, your dealer or your inspection station.

What we add is a second set of eyes. Washing and spraying a truck’s underside puts us close to the frame, lines and connectors, so if something looks wrong, such as a leaking fitting, a rubbing hose, a cracked bracket or rust past surface level, we’ll tell you. That way it reaches the right person before it becomes downtime.

What to expect

How our mobile service works

  1. 1Send your unit list

    Call (437) 999-1637 or email oes@ontarioequipmentservices.ca with your units, what each needs and where they’re parked, for a no-obligation quote.

  2. 2Plan the round

    We agree on timing around your shifts and decide whether one visit covers the yard or the work is split across sites.

  3. 3Wash before anything else

    Salt, sand and mud come off frames, undercarriages, bodies and decks so the oil reaches clean steel.

  4. 4Oil spray, grease and interiors

    Dripless amber (or black) oil goes on, grease points are done to the manufacturer’s intervals, and cabs and seats are handled where booked.

  5. 5Plan what comes next

    We mention anything for your mechanic and any units we couldn’t reach, and you choose when the next wash-down or round happens.

FAQ

Fleet Rustproofing & Wash Programs questions

Don’t see your question? We are happy to answer any questions or inquiries you may have.

One visit can cover a whole yard. Send the unit list and where everything is parked, and the quote will show how we’d plan it, including the order if units are spread over several sites.

Yes. Regular visits can be scheduled, so salt wash-downs between storms happen on a rhythm instead of whenever someone finds the time. How often depends on your units, routes and the weather.

No. Fall is the best time, but it’s never too late. We wash the salt off first and then spray, so units that missed the fall round are still protected for the rest of the season.

Yes. We power wash semi-trucks, flatbeds, dump trailers, float trailers and enclosed trailers in your yard or lot, and we can oil spray frames and grease fifth wheels and hitches on the same visit.

No. We wash, oil spray, grease, clean cabs and repair seats. Mechanical repairs and inspections stay with your mechanic, but we’ll let you know about anything we notice while we work.

Keep a unit list with the date of each wash, oil spray and grease, and mark any unit that missed a round. With dripless amber oil, a look underneath also shows you a unit’s coverage.

Service areas

Fleet Rustproofing & Wash Programs near you

We are mobile and based in Mount Albert, so we come to yards, farms, job sites and driveways across York Region, Simcoe, Durham and the GTA. Local pages:

Call